Water Source Heat Pump Copeland compressor Swimming Pool Heat Pump
- with Advanced DC inverter technology, it saves 40% energy than
normal heat pump in practical operation.
- 5 modes to manage heating, cooling and DHW, fits your need all
- with temperature compensation function, the water setting
temperature adjusts automatically as the house's heat loss changes.
- Automatically variable fan speed in 3 grades to optimized heating
- Can work with room thermostat.
- Can work with auxiliary heater.
- Split design with water system indoor, preventing water frozen
- Aviation plug for wire connection between indoor unit and outdoor
unit, simplifies installation and avoids mistakes.
- with controller interface, plate heat exchanger, circulation
pump, flow switch, water pressure gauge in indoor unit.
- Allows absence of buffer tank.
Some important information:
1,Working mode: Heating mode
2,Level of protection: IPX4
3,Electric shock proof grade: I
4,Refrigerant: R407C or R134A or R417A
1,Compressor: Copeland scroll compressor
2,Controller:wedy multifunction controller, (circuit board, LCD
panel, temperature sensors)
3,Evaporator: Hydropilic Aluminium foil and internal thread copper
pipe heat exchanger
4,Throttle unit: Danfoss electric expansion valve
5,Cabinet: Galvanized sheet/ Spray coating/ gray color or stainless
6,Condenser: high efficiency shell and tube heat exchanger or
double-pipe heat exchanger
1. High Efficiency With COP Value Pompes A Chaleur Pool Heater
2. Durable made of PVC & Titaniumtube
3. Easy operation
4. Quiet operation
5. Can heat when the temperature below 10℃
* High effciency, with a COP value up to 5.0 our heat pumps are
when transferring heat from the air to the swimming pool water.
You can save as much as 80% of cost compared to an electrical
heater with long life.
* The heat exchanger is made of PVC& Titanium tube, which can
withstand and prolong exposure to swimming pool water.
* Easy control and operation. Simply switch it on and set the
desired pool water temperature.
* The system includes a micro-computer controller, allowing all
operation parameters to be set.
Operation status can be displayed on the controller with LCD
SolarShine Low-Ambient-Temperature Air source Energy Heat Pump
Heating + Refrigeration Two-way Supply unit is design for northern
cold-climate regions for centralized heating, household heating and
central hot water in various enterprises and institutions.
The unit uses jet enthalpy-increasing technology(EVI), combined
with our perfect control logic, so that the unit can still work
normally under the low temperature environment of -25℃, and the
energy efficiency ratio can still be as high as 200%. Under
standard condition of ambient temperature of 20℃, its heating
efficiency can up to 400%.
It has great advantages of safe use, energy saving, clean, no
emission, reliable and stable operation. Unit power from 3HP-30HP,
a number of models can be selected, to meet the heating and hot
water needs of different regions, different families and different
units in the north in an all-round way.
-25℃ Low ambient temperature air source heat pump unit
----For:hot water / Floor heating / Fancoil heating and cooling....
1, Heating mode
2,Compressor over current protection function
3, Automatically remember all parameters if power off
4, Display water tank temp, preset temp and inquiry function
5,Turn on/off at two certain period of time within 24 hours.
6,Compressors run in balance and starts are staggered.
7,Electric heating back up.
8,Automatically and forced defrosting function
9,Huge LCD display (with blue background and white word).
10,Perfect protect and display
11,Lack of phase or wrong phase of three phase power supply can be
13, Under the condition of without control panel (or panel
damaged), system can work automatically.
14,Linkage interface (optional)